Euphoric sound with digital clarity and analog polish from Rupert Neve Designs transformer

To deliver a clearer sound quality that accurately reproduces the expression of the music, the euphonia uses high-quality 32-bit A/D and D/A converters as well as 96 kHz/64-bit floating point mixing processing operations in the DSP. All sound coming out of the euphonia passes through a transformer circuit co-designed by AlphaTheta and Rupert Neve Designs, the legendary makers of outstanding analog audio circuitry and mixing desks. This transformer circuit, tuned specifically for the euphonia, adds harmonics to the music and creates a glossy and energetic sound that's smoother for mixing.

Musically enriched and glossy sound

The sound profile is narrower than that of the Pioneer DJ DJM-A9 and Pioneer DJ DJM-V10, but the energy is concentrated, giving thicker and denser sound, especially in low / low-mid frequencies such as kick or bass.

As a guide, the sound is most saturated on the condition that CH peak level shows 6dB to 9dB and CH fader is set to 7. The amount of saturation depends on the audio level to the transformer circuit, so that you can control sound character by fader operations.

Specially developed rotary fader makes the DJ feel at one with the music

The euphonia's rotary faders feature a brand-new design to give DJs the feeling that they and the mixer are one. After extensive testing, the perfect knob sizes were chosen, with an elastomer applied to the outer circumference of each to ensure a comfortable grip as well as a high level of vibration absorption. The faders also benefit from optimum weighting and they feel different when turned at different speeds, as a higher load is applied during slow turns for delicate fine-tuning, and a lower load level is applied during quick turns to instantly reach the intended volume level. And the fader volume curves have been optimised to enable smooth and natural mixing without equalising, so DJs can concentrate on volume control.

Energy Visualizer for understanding overall sound at first glance

The uniquely developed Mix Level Meter on the euphonia's Energy Visualizer features a needle meter for each channel so DJs can visually check the levels for all channels and mix smoothly while keeping the groove going. They can even keep an eye on the balance of the Master output by looking at the Spectrum Analyzer to help keep mixes sounding consistent and smooth.

Energy Visualiser: View Modes

Press the [VIEW/UTILITY] button to switch between Needle View (default) and Digital View. You can adjust the brightness with the [BRIGHTNESS] button.

• Needle View: Shows the status of sound with the Mix Level Meter, meter needles, and Spectrum Analyser. The white stripe above represent the master level, and the coloured needles represent every channel.
• Digital View: Shows the status of sound with the Mix Level Meter in columns chart, the Master Level and Spectrum Analyser.

Next-generation 3Band Master Isolator that transforms sensibility into sound

The 3Band Master Isolator was specially built for the euphonia. The size of the knobs is perfect for rapid turns from center to maximum or minimum, and the torque load is perfectly balanced for both quick operation and fine sound quality adjustment, with a luxurious feel that's not too light. The cut-off frequency and slope are set to control and highlight the kick, melody, and rhythm bands in a natural yet sharp manner. And with the Boost Send and Boost Level features, DJs have even more creative options at their fingertips.

Built-in Send FX to bring depth and breadth to the music

The euphonia features 5 built-in spatial effects and a high-pass filter for easily adding depth and breadth to the music. These are: Delay, Tape Echo, Echo Verb, Reverb, Shimmer, and HPF (high-pass filter). There's also a Send/Return section which gives the option to connect external effects units.