Crown XLS 802
Crown XLS 802
Rugged, all-steel 2U chassis Amplifier
- 800W @ 4-ohm Stereo (per channel)
- 500W @ 8-ohm Stereo (per channel)
- 1600W @ 8-ohm Bridge Mono
Frequently bought together:
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of five models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features.
Crown XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements—reliably and within budget. Every XLS Series amplifier is backed by Crown’s unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything.
With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series. They are a powerful argument for quality and value!
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon outputs
- Precision detented level controls, power switch, power LED.
- Six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty
| Performance | |
| Sensitivity: |
1.25 Vrms (for full rated power at 4 ohms) |
| Frequency Response: | 22 Hz to 20 kHz (+0 dB / –1 dB at 1 watt) |
|
Signal-to-Noise Ratio: (20 Hz to 20 kHz, inputs |
|
| terminated) | |
| A-weighted, below rated power: | > 100 dB. |
| No weighting, below rated power: | > 95 dB. |
| Total Harmonic Distortion (THD): | < 0.5%. |
| Intermodulation Distortion (IMD): |
< 0.3% (60 Hz and 7 kHz at 4:1) from full rated output to –40 dB. |
| Damping Factor: | >200 (8 ohm) 10 Hz to 400 Hz |
| Crosstalk (below rated power): |
at 1 kHz: –75 dB at 20 kHz: –59 dB |
| Input Impedance (nominal): | 20 kilohms balanced, 10 kilohms unbalanced. |
| Output Power: |
800W @ 4-ohm Stereo (per channel) 500W @ 8-ohm Stereo (per channel) 1600W @ 8-ohm Bridge Mono |
| CONTROLS | |
| Level: | Two front-panel rotary level controls, one for each channel. |
| Power: | Front-panel switch; on when in the IN position. |
| Circuit Breaker: | Back-panel breaker provides overload protection. |
| Mode Switch: | Back-panel switch selects Dual or Bridge-Mono mode. |
| Indicators | |
| Signal Presence Indicators: |
Two green LEDs, one for each channel, illuminate when the channel’s input signal exceeds –40 dBu. |
| Clip Indicators: |
Two red LEDs, one for each channel, illuminate when the channel’s output is being overdriven. |
| Power Indicator: | Blue LED indicates amplifier has been turned on and AC power is available. |
| Fault Indicator: |
Two red LEDs, one for each channel, illuminate when amplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on. |
| INPUT/OUTPUT | |
| Input Connectors: | Female XLR Input Connectors, One per channel; backpanel |
| Output Connectors: |
- Two 4-Pole Speakon. Output Connectors accept 2-pole or 4-pole |
|
Speakon connectors. The top Speakon connector is wired for both channels so it can |
|
|
be used for bridge-mono wiring or for stereo wiring of two speakers to a single Speakon connector. - One pair of back-panel binding posts per channel; accepts bare wire. |
|
| Protection: |
output current limiting, DC protection, circuit breaker, and thermal protection. |
| Construction | |
| Ventilation: | Flow-through ventilation from front to back. |
| Cooling: | Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation. |
| Air Volume Requirements (per minute per | |
| unit): | 80.15 ft³ (2.27 m³). |