Sennheiser XSW-D 2.4GHz Wireless Portable Interview System
Sennheiser XSW-D 2.4GHz Wireless Portable Interview System
Capturing interviews with a handheld mic* has never been easier. Plug in the XLR transmitter, power it up and you're immediately up and running.
* Handheld mic not included with this system
One-touch ease-of-use wireless audio set that utilises a digital transmission to seamlessly link audio sources. Equipped with an XLR transmitter and a 3.5mm (1/8”) receiver, this elegant solution makes capturing interviews with a dynamic handheld microphone easier than ever before while maintaining a reliable connection.
Frequently bought together:
Lose the cables, keep the connection
Essentially a cable replacement, XS Wireless Digital uses a 2.4 GHz transmission to create a wireless peer-to-peer connection. Simply plug a dynamic handheld mic (not included) into the XLR transmitter and fit the receiver (using the included cold shoe mount) to your camera rig, connecting the included cable to you camera's microphone input. As soon as you see the green light, you’re good to go.
As easy as it gets
Each XS Wireless Digital transmitter and receiver have only one button. Press to power up and link simultaneously, click once to mute, and hold to power down. What’s more, they each feature a single LED that indicates when your connection is secure or when it’s time to charge the battery. There are no menus to fuss with or settings to worry about. It’s almost as easy as plugging in a cable, minus the cable part.
Digital for worldwide operation
Sennheiser XS Wireless Digital uses the same 2.4 GHz frequency as WiFi allowing for license free operation worldwide. There is no need to scan for available frequencies as the system automatically does it for you. This means you can take XSW-D with you wherever you go without fear of static interference or dropouts. Just turn it on and start your presentation.
What's in the box:
- XSW-D XLR Female transmitter
- XSW-D 3.5mm (1/8”) receiver
- 3.5mm (1/8") coiled cable
- Cold shoe mount
- USB-A to USB-C charging cable
- One touch ease-of-use
- 2.4 GHz digital transmission for worldwide operation
- 75m range (250ft) in optimal conditions
- Up to 5 hours battery life on a single charge
- Switch between multiple transmitters linked to one receiver
- Configure any combination of transmitters and receivers
- Mute from either transmitter or receiver
| Dimensions: |
XSW-D XLR FEMALE TX: approx. 102 x 24 x 28 mm XSW-D MINI JACK RX: approx. 86 x 24 x 28 mm |
| THD, total harmonic distortion: | < 0.1 % |
| Charging time: | typically 3 h |
| Audio output: | max. 12 dBu |
| Operating temperature: |
-10 °C to +55 °C (14 °F to 131 °F) |
| Signal-to-noise ratio: | >= 106 dB |
| Operating time: | up to 5 h |
| Modulation: | GFSK with TDMA |
| Battery Specification: | Li-Ion |
| Capacity: | 850 mAh |
| Codecs: | aptX Live |
| Frequency range: | 2,400 - 2,483.5MHz |
| Max. Input voltage: | typically 5.0 V |
| Transmission power: | max. 10 mW |
| Voltage: | 3.7 V |
| Operating relative humidity: | 95% (non-condensing) |
| Latency: | < 4 ms |
| Temperature Range: | 0 °C - 60 °C (32 °F - 140 °F) |
| Audio frequency response: | 3.5 mm Jack/XLR: 80 - 18,000 Hz |