Rode NTG4+
Rode NTG4+
Highlights
- Broadcast sound quality
- Low noise circuitry
We are here to help!
020 8579 0144
Frequently bought together:
Keep browsing or just give us a call: 020 8579 0144. We are here to help!
Building on the popularity and acceptance of the RODE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.
The Rode NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
Intuitive Digital Switching
Control the in-built high-pass filter, pad and high frequency boost using convenient digital switching on the microphone body. Persistent states ensure your settings are retained when the microphone is switched off.
Internal Battery (NTG4+)
Provides 150+ hours of operation from with a charge time of only two hours. The included MicroUSB cable makes charging simple and convenient, meaning the mic can be charged via a computer, power-brick or even your car.
Super Low-Noise
The NTG4 & NTG4+ both feature an all-new condenser capsule from RØDE with low noise floor, higher sensitivity and a rich, smooth character.
Included accessories
- RM5 Mic Clip
- Foam Windshield
- ZP1 Pouch
- Micro USB
- Broadcast sound quality
- Low noise circuitry
- Internal rechargeable lithium battery, supplying over 150 hours operation
- Fully charged in under two hours via MicroUSB
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- MicroUSB cable included
- 10 year extended warranty when you register your microphone
| 10 Year Warranty: | Yes |
| Super-low Noise: | Yes |
| Digital Switching: | Yes |
| P48 Powered: | Yes |
| Internal Battery: | Yes |
| Charge via USB: | Yes |
| High-pass filter (75Hz): | Yes |
| Pad (-10dB): | Yes |
| High Frequency Boost: | Yes |
| Acoustic Principle: | Line Gradient |
| Capsule: | 0.50" |
| Polar Pattern: | Supercardioid |
| Address Type: | End |
| Frequency Range: | 20Hz - 20kHz (selected HPF @75Hz) |
| Output Impedance: | 200 ohms |
| Maximum SPL: | 135dBSPL |
| Sensitivity: |
-32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted): | 16dBA |
| Power Options: |
+48V phantom power Internal battery |
| Weight: | 176g |
| Dimensions: | 278mm H x 22mm W x 22mm D |
| Output: | XLR Output |
| Warranty: | 1 year with free extension to 10 years following registration |